SHIELDMASTER/14

OUTSTANDING WEAR RESISTANCE

TECHNICAL DATA

PART REF.	HOSE SIZE			R.O.D		O.D		MAX. W.P		BURST		MIN. BEND		WEIGHT		FITTINGS
	DN	dash	inch	mm	inch	mm	inch	bar	psi	bar	psi	mm	inch	g/m	lb/ft	Std 1	Std 2
H01184005*	5	– 3	3/16"	7.8	0.3	9.6	0.37	140	2,030	560	8,122	20.0	0.78	113	0.08	MN + M02400-03	MF + M03300-03KM
H01184006*	6	– 4	1/4"	9.7	0.38	11.5	0.45	140	2,030	560	8,122	25.0	0.98	147	0.1	MN + M02400-04	MF + M03300-04
H01184010*	10	– 6	3/8"	13.2	0.51	14.8	0.58	140	2,030	560	8,122	40.0	1.57	240	0.16	MN + M02400-06	MF + M03300-06
H01184012*	12	– 8	1/2"	16.2	0.63	18.0	0.7	140	2,030	560	8,122	50.0	1.96	285	0.19	MN + M02400-08	MF + M03300-08

KEY FEATURES

• Outstanding abrasion and ozone resistance
• Compact and light structures
• Very low bend radius makes the product suitable for difficult installations
• Easy assembling and mounting operations (no protection sleeves required)
• Isobaric pressure rating
• Suitable for very cold environments

APPLICATIONS & FLUIDS

• Low pressure hydraulic lines, pilot and auxiliary lines
• High resistance to abrasion conditions, including rubbing among hoses in bunches, alternative to spring guards, easy cleaning in dusty environments
• For severe environmental conditions, long resistance to ozone and weathering, cold temperatures, dirty industrial environments
• Mineral oils, vegetable oils and synthetic ester based oils (up to 100°C/212°F), glycols and polyglycols, mineral oils in aqueous emulsion, water

CONTINUOUS SERVICE TEMPERATURE RANGE

-46 °C, -50 °F
100 °C, 212 °F

TUBE

Oil resistant synthetic rubber

REINFORCEMENT

One high tensile wire braid (DN 5 to 12)

COVER

SHIELD
Composite bi-layer structure with outstanding abrasion and ozone resistance

APPLICABLE SPECS

ISO 18752 Type B

TYPE APPROVALS

MSHA, FRAS (requested)

REMARKS

Applications with material projections or winding on low bend radius pulley systems should be field tested before use; high abrasion resistant rubber cover hoses are appropriate in most cases