PUSH-PULL FEMALE CONNECTABLE WITH MALE UNDER PRESSURE – MQS-ARM

 

TECHNICAL DATA

SIZE

WORKING
PRESSURE
Dynamic

RATED FLOW
at 0.2 MPa of
pressure drop

CONNECTION
EFFORT

OIL SPILLAGE
Connection /
Disconnection

MINIMUM BURST PRESSURE

CONNECTION /
DISCONNECTION
UNDER
PRESSURE

DN

inch

Dash

MPa

PSI

Flow
Direction

l/min

US
GPM

N

lb.

cc.

cubic
inch

Male

M & F

MPa

PSI

MPa

PSI

12 1/2 8 30 4,350 F -> M 80 21.1 230 51.1 2 0.122 125 18,125 125 18,125 Connection only, with male under pressure
M -> F 68 18.0
The rated flow represents the normal operating condition. The maximum recommended flow rate is equal to 1.5 times the rated flow

PRODUCT DESCRIPTION

• Connectable with male ISO A under pressure
• Working pressure 30MPa
• Connection/disconnection PUSH-PULL
• No shut-off, Manuli mechanical valve block system
• Installation on pipe and ports
• Breakaway function according to ISO 5675
• Interchangeable according to ISO 7241 series A
• Wide range of termination ends
• According to all requirements of ISO 5675

MATERIAL

Couplings in steel with some stressed area hardened, carbonitrided valve, springs in C98 steel, seals in NBR, back-up ring PTFE. PU seal on ½” female available on request.

WORKING TEMPERATURE

-22ºF up to +230ºF (-30ºC up to +110ºC)
For other temperatures, the quick coupling is assembled with specific seals

SAFETY FACTOR

4:1 for dynamic pressures

IMPULSE PRESSURES

500,000 cycles (connected and disconnected conditions) at 120% of the rated one (freq. 1Hz)

TEST SPECIFICATIONS

ISO 18869

Find out more with our Q.Safe Catalogue