SHIELDMASTER/28

OUTSTANDING WEAR RESISTANCE

TECHNICAL DATA
# # # # # # # # #
PART REF. HOSE SIZE R.O.D O.D MAX. W.P BURST MIN. BEND WEIGHT FITTINGS
DN dash inch mm inch mm inch bar psi bar psi mm inch g/m lb/ft Std 1 Std 2
H01155006* 6 -4 1/4” 11.6 0.46 13.6 0.54 280 4,060 1,120 16,240 50 1.97 272 0.18 MF+M00120-04 OPF-04
H01155008* 8 -5 5/16” 12.9 0.51 14.9 0.59 280 4,060 1,120 16,240 55 2.17 299 0.20 MF+M00120-05 OPF-05
H01155010* 10 -6 3/8” 15.4 0.61 17.4 0.69 280 4,060 1,120 16,240 63 2.48 397 0.27 MF+M00120-06 OPF-06
H01155012* 12 -8 1/2” 18.5 0.73 20.5 0.81 280 4,060 1,120 16,240 80 3.15 507 0.34 MF+M00120-08 OPK-08
H01155016* 16 -10 5/8”” 22.7 0.89 24.7 0.97 280 4,060 1,120 16,240 90 3.54 731 0.49 MF+M00120-10 OPK-10
H01155019* 19 -12 3/4” 27.1 1.07 29.3 1.15 280 4,060 1,120 16,240 120 4.72 1,058 0.71 MF+M00120-12 OPK-12
H01155025* 25 -16 1” 34.1 1.34 36.5 1.44 280 4,060 1,120 16,240 150 5.91 1,536 1.03 MF+M00930-16 OPK-16
H01155031* 31 -20 1.1/4” 41.7 1.64 44.5 1.75 280 4,060 1,120 16,240 210 8.27 2,171 1.46 MF+M00920-20 OPK-20
H01155051* 51 -32 2” 63.9 2.51 67.5 2.65 280 4,060 1,120 16,240 350 13.77 4,716 3.17 IP+M01500-32

KEY FEATURES

• Outstanding abrasion and ozone resistance
• Compact and light structures
• Very low bend radius makes the product suitable for difficult installations
• Easy assembling and mounting operations (no protection sleeves required)
• Isobaric pressure rating
• Suitable for very cold environments

APPLICATIONS & FLUIDS

• Medium and high pressure hydraulic lines
• High resistance to abrasion conditions, including rubbing among hoses in bunches, alternative to spring guards, easy cleaning in dusty environments
• For severe environmental conditions, long resistance to ozone and weathering, cold temperatures, dirty industrial environments
• Mineral oils, vegetable oils and synthetic ester based oils (up to 100°C/212°F), glycols and polyglycols, mineral oils in aqueous emulsion, water

CONTINUOUS SERVICE TEMPERATURE RANGE

-46 °C, -50 °F
100 °C, 212 °F

TUBE

Oil resistant synthetic rubber

REINFORCEMENT

Two high tensile steel braids (DN 6-19); Four high tensile steel spirals (DN 25-31)

COVER

SHIELD
Composite bi-layer structure with outstanding abrasion and ozone resistance

APPLICABLE SPECS

ISO 18752 Type B

TYPE APPROVALS

MSHA, FRAS (requested); CU-TR

REMARKS

Applications with material projections or winding on low bend radius pulley systems should be field tested before use; high abrasion resistant rubber cover hoses are appropriate in most cases