Location of Serial Number
Serial number is of the format "A1234567890"
Serial Number can also be found under the electronics panel cover
ISO B FOR DRILLING BOP UNITS – MQS-BOP
|
TECHNICAL DATA |
|||||||||||||||||||
|
SIZE |
WORKING |
WORKING |
RATED FLOW |
CONNECTION |
OIL SPILLAGE |
MINIMUM BURST PRESSURE |
CONNECTION / |
||||||||||||
|
DN |
inch |
Dash |
MPa |
PSI |
MPa |
PSI |
l/min |
US |
N |
lb. |
cc. |
cubic |
Male |
Female |
M & F |
||||
|
MPa |
PSI |
MPa |
PSI |
MPa |
PSI |
||||||||||||||
| 12 | 1/2 | 8 | 42 | 6,090 | 35 | 5,075 | 55 | 14.6 | 70 | 15.6 | 2.5 | 0.153 | 140 | 20,300 | 140 | 20,300 | 180 | 26,100 | Not allowed |
| 19 | 3/4 | 12 | 35 | 5,075 | 25 | 3,625 | 122 | 32.1 | 90 | 20.0 | 8.5 | 0.519 | 100 | 14,500 | 100 | 14,500 | 150 | 21,750 | Not allowed |
| 25 | 1 | 16 | 35 | 5,075 | 25 | 3,625 | 183 | 48.3 | 90 | 20.0 | 15.0 | 0.916 | 100 | 14,500 | 100 | 14,500 | 140 | 20,300 | Not allowed |
| The rated flow represents the normal operating condition. The maximum recommended flow rate is equal to 1.5 times the rated flow | |||||||||||||||||||
PRODUCT DESCRIPTION
• MQS-B BOP VERSION is designed for BOP (Blow-out preventer) service in Oil & Gas Industry
• Simple connection & disconnection by pulling back the sleeve
• Safety system on the female part to avoid accidental disconnection
• Positive quick connection of the male into the female by latching ball system
• Poppet valve sealing system that guarantee high sealing performance at low & high pressure
• ECOAT zinc plating with improved corrosion protection and environmentally friendly process
• Female & Male Coupling with red identification for an easy visual verification
• ISO 7241 series B interchangeable
• API 16D approval.
MATERIAL
Female & male couplings in high grade carbon steel with hardened areas in correspondence to the mist stressed points. Seal in Viton with back-up in PTFE.
WORKING TEMPERATURE
-25°C to +200°C
SAFETY FACTOR
4:1 in CONNECTED & DISCONNECTED conditions
IMPULSE PRESSURES
100,000 cycles at 133% of the rated one (freq. 1Hz)
TEST SPECIFICATIONS
ISO 18869 , Flame resistance test to API 16D
| NPT | ||||
| Q02613341F/Q02113341F | ||||
 |
Q02613341F Q02113341F |
||||||||||
| NPTF TERMINATION ENDS TO ANSI B1.20.3 |
| SIZE | PART NUMBER | THREAD | DIMENSIONS mm | ||||||||
| DN | Inch | Dash | Female coupling | Male coupling | A | B | C | D | E | F | |
| 12.5 | 1/2" | -08 | Q02613341F-08-08 | Q02113341F-08-08 | 1/2" NPTF | 74 | 46.5 | A+B-27,2 | ⌀44 | 30 | 27 |
| 20 | 3/4" | -12 | Q02613341F-12-12 | Q02113341F-12-12 | 3/4" NPTF | 91 | 56.5 | A+B-34,2 | ⌀54 | 36 | 34 |
| 25 | 1" | -16 | Q02613341F-16-16 | Q02113341F-16-16 | 1" NPTF | 104 | 64.5 | A+B-39,2 | ⌀64 | 46 | 41 |