HT PROTECTION SPRING (HTPS)

HT PROTECTION SPRING
HTPS
PART. REF DESCRIPTION DIMENSIONS
INTERNAL DIAMETER
(ID)		 OUTSIDE DIAMETER
(OD)		 WALL
THICKNESS (T)		 PITCH
(P)		 WRAPPING
RANGE		 WEIGHT STANDARD
PACK
LENGTH
mm in mm in mm in mm in mm in g/m lb/ft m ft
JP12B03010I099 HT PROTECTION SPRING DN 10 9.5 0.37 11.5 0.45 1.00 0.039 6.9 0.27 9-13 0.35-0.51 27 0.02 24 79.2
JP12B03011I099 HT PROTECTION SPRING DN 11 11.0 0.43 13.0 0.51 1.00 0.039 6.9 0.27 11-13 0.43-0.52 35 0.025 24 78.7
JP12B03013I099 HT PROTECTION SPRING DN 13 12.7 0.50 16.3 0.64 1.80 0.071 13.0 0.51 13-17 0.51-0.67 45 0.03 24 79.2
JP12B03014I099 HT PROTECTION SPRING DN 14 14.0 0.55 17.6 0.69 1.80 0.071 13.0 0.51 14-17 0.55-0.67 50 0.035 24 78.7
JP12B03016I099 HT PROTECTION SPRING DN 16 16.0 0.63 19.6 0.77 1.80 0.071 13.0 0.51 16-22 0.63-0.87 55 0.04 24 79.2
JP12B03019I099 HT PROTECTION SPRING DN 19 19.0 0.75 23.6 0.93 2.30 0.091 16.0 0.63 19-28 0.75-1.10 100 0.07 24 79.2
JP12B03025I099 HT PROTECTION SPRING DN 25 25.4 1.00 30.0 1.18 2.30 0.091 16.0 0.63 25-40 0.98-1.57 110 0.07 24 79.2
JP12B03028I099 HT PROTECTION SPRING DN 28 28.0 1.10 35.2 1.39 3.60 0.142 25.0 0.98 28-48 1.10-1.89 225 0.15 24 79.2
JP12B03035I099 HT PROTECTION SPRING DN 35 35.0 1.38 42.2 1.66 3.60 0.142 25.0 0.98 35-50 1.38-1.97 270 0.18 24 79.2
JP12B03050I099 HT PROTECTION SPRING DN 50 50.0 1.97 60.0 2.36 5.00 0.197 35.0 1.38 50-70 1.97-2.76 540 0.36 12 39.6
JP12B03060I099 HT PROTECTION SPRING DN 60 60.0 2.36 70.0 2.76 5.00 0.197 35.0 1.38 60-80 2.36-3.15 640 0.43 12 39.6

KEY FEATURES

• High temperature resistance
• High abrasion resistance
• Very high flexibility
• Very low bend radius
• Flame retardant, MSHA approved
• Resistant to water, oils, fuels and hydraulic fluids
• Easy to install, no clamps needed

CONTINUOUS SERVICE TEMPERATURE RANGE

-40 °C, -40 °F
120 °C, 248 °F

MATERIAL

Polyamide

APPLICABLE SPECS

Manuli® Design, MSHA