GAIA/21
CHLORINE-FREE LINE
KEY FEATURES
• Bend radius which exceeds the standard requirements by - 30% to -50%
• Good flexibility in the whole temperature range
• Easy mounting in any installation
• High impulse resistance according to ISO 18752 requirements
• Weight saving of 20% vs traditional hose construction
• No-skive fitting solution is available
• Isobaric pressure rating for easy selection and product management
APPLICATIONS & FLUIDS
- Hydraulics: low pressure lines, auxiliary hydraulic systems for OEMs and high performance applications
- Mineral oils, vegetable and rape seed oils, glycol and polyglycol based oils, synthetic ester based oils, oils in aqueous emulsion, water
CONTINUOUS SERVICE TEMPERATURE RANGE
-46 °C, -50 °F
121 °C, 250 °F
TUBE
Oil resistant synthetic rubber
REINFORCEMENT
One high tensile steel braid (DN 25), two high tensile steel braids (DN 38, 51)
COVER
CHLORINE FREE cover Synthetic rubber with high abrasion, ozone, weather and heat resistance and an extended operational temperature range
APPLICABLE SPECS
ISO 18752 Grade C extension
TYPE APPOVALS
MSHA
| TECHNICAL DATA | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||
| PART REF. | HOSE SIZE | R.O.D | O.D | MAX. W.P | BURST | MIN. BEND | WEIGHT | FITTINGS | |||||||||
| DN | dash | inch | mm | inch | mm | inch | bar | psi | bar | psi | mm | inch | g/m | lb/ft | Std 1 | Std 2 | |
| H01204006 | 6 | -4 | 1/4″ | 10.2 | 0.4 | 12.0 | 0.47 | 210 | 3,040 | 840 | 12,183 | 50.0 | 1.96 | 183 | 0.12 | MF + M03300-04 | |
| H01204008* | 8 | -5 | 5/16″ | 11.5 | 0.45 | 13.6 | 0.53 | 210 | 3,040 | 840 | 12,183 | 55.0 | 2.16 | 214 | 0.14 | MF + M03300-05 | |
| H01204010* | 10 | -6 | 3/8″ | 14.4 | 0.56 | 16.2 | 0.63 | 210 | 3,040 | 840 | 12,183 | 65.0 | 2.55 | 300 | 0.2 | MF + M03300-06 | |
| H01204012* | 12 | -8 | 1/2″ | 17.9 | 0.7 | 19.7 | 0.77 | 210 | 3,040 | 840 | 12,183 | 90.0 | 3.54 | 418 | 0.28 | MF + M03300-08 | |
| H01204016* | 16 | -10 | 5/8″ | 22.2 | 0.87 | 24.0 | 0.94 | 210 | 3,040 | 840 | 12,183 | 100.0 | 3.93 | 615 | 0.41 | MF + M03400-10 | |
| H01204019* | 19 | -12 | 3/4″ | 25.6 | 1.0 | 27.7 | 1.09 | 210 | 3,040 | 840 | 12,183 | 120.0 | 4.72 | 772 | 0.52 | MF + M03400-12 | |
| H01204025* | 25 | -16 | 1″ | 33.0 | 1.29 | 35.2 | 1.38 | 210 | 3,040 | 840 | 12,183 | 150.0 | 5.9 | 1,194 | 0.8 | MF + M03400-16 | |
| H01204031* | 31 | -20 | 1.1/4″ | 41.7 | 1.64 | 44.5 | 1.64 | 210 | 3,040 | 840 | 12,183 | 210.0 | 8.26 | 2,069 | 1.39 | MF + M00920-20 | |
| H01204038* | 38 | -24 | 1.1/2″ | 48.9 | 1.92 | 52.1 | 1.92 | 210 | 3,040 | 840 | 12,183 | 260.0 | 10.23 | 2,987 | 2.01 | IP + M01500-24 | |
| H01204051* | 51 | -32 | 2″ | 63.2 | 2.48 | 66.8 | 2.48 | 210 | 3,040 | 840 | 12,183 | 330.0 | 12.99 | 4,329 | 2.91 | IP + M01500-32 | |
DISCLAIMER:
We reserve the right to modify our products and/or related services and/or discontinue the manufacture and/or supply of any of the products and/or related services, without notice. This document supersedes all previous versions and previously issued documentation. The only official source of technical crimping parameters regarding our products is our Digital Crimp Tools. Printed copies are uncontrolled therefore, please be sure to use the latest versions of our Manuli Crimp App or Manuli Crimp Web Tool. Don’t mix and match: always use original hoses and fittings. For more information, see our ‘Safety Guide’.