HERCULES/HT
HEAVY DUTY FOR GIANT EQUIPMENT
KEY FEATURES
• Robustness and durability - longer than 1 year on “hump hose” applications
• Bend radius exceeds standard requirements by -30% to -50%
• Good flexibility across the whole temperature range
• Easy mounting in any installation
• High impulse resistance according to ISO 18752
• Isobaric pressure rating for easy selection and product management
APPLICATIONS & FLUIDS
- High pressure power lines for general hydraulics
- Heavy duty power lines
- Hump hoses on giant excavators
- Long durability due to special tube compound
- Applications with long assemblies with self-standing capacity
- Applications with installation constraints (short assemblies, compact spaces, low bend radii etc.)
- Mineral oils, vegetable oils and synthetic ester based oils (up to 100°C/212°F), glycols and polyglycols, mineral oils in aqueous emulsion, water
CONTINUOUS SERVICE TEMPERATURE RANGE
-46 °C, -50 °F
135 °C, 275 °F
TUBE
Oil resistant synthetic rubber
REINFORCEMENT
Six high tensile steel spirals
COVER
STRONG – TYPE “SC”
Synthetic rubber with high abrasion, ozone, weather and heat resistance and an extended operational temperature range
APPLICABLE SPECS
ISO 18752-D Ext., exceeds SAE J517 R15
TYPE APPOVALS
MSHA; CU-TR
REMARKS
Hercules/HT is enhanced by new HSSL heat shrinkable sleeves (optional). These heat shrinkable sleeves protect the ferrule from dirt inclusion and moisture ingression under the ferrule. Sleeves are made with heat shrinkable material, which is self-extinguishing and provides low voltage electrical insulation, provide the best possible protection with high abrasion resistance.
| TECHNICAL DATA | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||
| PART REF. | HOSE SIZE | R.O.D | O.D | MAX. W.P | BURST | MIN. BEND | WEIGHT | FITTINGS | |||||||||
| DN | dash | inch | mm | inch | mm | inch | bar | psi | bar | psi | mm | inch | g/m | lb/ft | Std 1 | Std 2 | |
| H10125031* | 31 | -20 | 1,1/4” | 47.7 | 1.88 | 50.9 | 2.00 | 420 | 6,090 | 1,680 | 24,360 | 400 | 15.75 | 4,175 | 2.81 | IP+M01850-20 | – |
| H10125038* | 38 | -24 | 1.1/2” | 55.2 | 2.17 | 58.7 | 2.31 | 420 | 6,090 | 1,680 | 24,360 | 450 | 17.72 | 5,195 | 3.49 | IS+M02700-24 | – |
| H10125051* | 51 | -32 | 2” | 68.9 | 2.71 | 72.4 | 2.85 | 420 | 6,090 | 1,680 | 24,360 | 500 | 19.69 | 7,265 | 4.88 | IS+M02700-32 | – |
DISCLAIMER:
We reserve the right to modify our products and/or related services and/or discontinue the manufacture and/or supply of any of the products and/or related services, without notice. This document supersedes all previous versions and previously issued documentation. The only official source of technical crimping parameters regarding our products is our Digital Crimp Tools. Printed copies are uncontrolled therefore, please be sure to use the latest versions of our Manuli Crimp App or Manuli Crimp Web Tool. Don’t mix and match: always use original hoses and fittings. For more information, see our ‘Safety Guide’.